Power Praise IEM Cables are pre-ordered products and are produced on demand. Items will usually be prepared within 7 business days and shipped afterward.
Images are for illustration purposes only. The actual product pin design will be specific to the version selected. For your purchase, please select the connector that matches your IEM/earphones/in-ear headphones.
The Dark 5N IEM cable is crafted from 5N single-crystal OFC material, ensuring superior signal transmission. To reduce interference, the midsection of the cable integrates a ferrite core that absorbs and suppresses high-frequency noise from electronic devices like players or mobile phones. Designed with softness in mind, the cable minimizes the stethoscope effect during use for a more comfortable experience. It offers moderate vocal positioning, a spacious soundstage, and a solid, powerful low-end. The Dark 5N also includes heat-shrink tubing for over-the-ear wearing, ensuring a secure and ergonomic fit.
Cable Materials:
- Core Material: Power Praise custom-made 5N single-crystal oxygen-free copper wire core.
- Structure: Ultra-soft PVC outer layer covering → Multi-strand shielding → Ultra-soft PVC insulation → Dual-track parallel multi-strand core
- Length: The total cable length used is 130cm; after double twist weaving (including the connector) and finished assembly, the final cable length is about 120cm.
- Solder: Adopts Danish Duelund 96.5% tin / 3.5% silver solder in the assembly process. Duelund is well-known for its high-end audio materials and craftsmanship. Its solder provides superior conductivity and corrosion resistance, has minimal impact on signal transmission quality, and enhances the stability and durability of solder joints.
- Ferrite Core: Used to absorb and suppress high-frequency noise from electronic devices (such as players or mobile phones), ensuring that the high-frequency performance of the cable remains smooth without harsh noise. The effect is more pronounced with IEMs that have lower impedance.
- Softness: The cable is extremely soft, minimizing the stethoscope effect during use.
- Ear Hook: The cable comes with an ear hook, which can be reshaped using a hair dryer if you prefer not to have the ear hook design.
Sound Quality Analysis:
- Vocal and Instrument Extension: Excellent extension and spacious. The bass is solid and enveloping, with good depth, suitable for most music genres.
- Sound Layering: Rich and detailed.
- Transient response: Moderate speed, preventing instrument sounds from merging together at faster tempos.
- Vocal Position: Centered, not too forward.
- Recommended for: Those looking to enhance bass volume and spatial sense while maintaining good vocal and instrument performance.
- Run-In Period: Recommended to run in for over 100 hours to achieve more refined and rich sound layering.
Source end connector options
- 2.5MM Balanced (Power Praise custom carbon fiber connector)
- 3.5MM Single-Ended (Power Praise custom carbon fiber connector)
- 4.4MM Balanced (Power Praise custom carbon fiber connector)
- Three-in-one Glod Plated Connector(4.4mm 3.5mm 2.5mm Swappable)
IEM end connector options
-
MMCX (using an expansion design, better connector stability):
For Shure SE215/SE315/SE425/SE535, UE 900 (UE900S), Westone new series IEMs, UMPRO W10, W20, W30, W40, W50, W60, SONY (except EXK), JVC -
DN2002:
MMCX compatible, suitable for DUNU DN2002, Titan3, Titan5 IEMs -
MMCX-S:
Suitable for SONY IER-Z1R, M7, M9 -
MMCX-A:
Suitable for AKG DN5005, N40, N30, SENNHEISER IE200, IE300, IE600, IE900 -
IE80:
For Sennheiser IE8, IE80 -
IE40pro:
For Sennheiser IE40pro -
IE500pro:
For Sennheiser IE100pro, IE400pro, IE500pro -
PE (Pentaconn Ear) pins:
Suitable for Acoustune HS1300SS, HS1677SS, HS1697Ti, HS1657, HS1650, HS1655CU, Spear Labs Triton 1 -
ATH-IM:
Exclusive for Audio-Technica series IEMs, ATH-IM50, IM70, IM01, IM02, IM03, IM04, etc. -
A2DC:
Exclusive for Audio-Technica series IEMs, ATH-CKS1100, ATH-E40, ATH-E50, ATH-E70, ATH-LS50, ATH-LS70, ATH-LS200, ATH-LS300, ATH-LS400 -
IPX pins:
For UE6, UE Live, 18, UE11 pro, Lighting SUPERBAX -
CM (pin diameter 0.78mm):
For JH-13, JH-16 custom IEMs, 1964 custom IEMs, UM3X, W4R, W4, etc. -
QDC (pin diameter 0.78mm):
Special pins for QDC IEMs, no positioning slot -
TF10 (pin diameter 0.75mm):
For Ultimate Ears (UE): Super.Fi 3 Studio, Super.Fi 5 Pro, Triple.Fi 10 Pro; M-Audio: IE-10, IE-30, IE-40 -
Fitear exclusive:
For Fitear togo 334, togo335, f111 -
ER4P:
For Etymotic ER4B, ER4PT, ER4S, ER6I, ER4P
Other Customizable Connectors
Please contact first if you would like the IEM end to be made with ConX (including CM 0.78, MMCX, Ear Connector, A2DC, IPX), or you would like the source end to be upgraded to 3-in-1 connector(4.4mm 3.5mm 2.5mm, swappable) that is rhodium-plated, carbon fiber gold-plated, or carbon fiber rhodium-plated, these options are customizable upon request and will be quoted separately.